YGE95LVT
LV (Low Voltage) in model making refers to applications in the low voltage range up to 6s or 8s LiPo. The YGE LVT and Saphir controllers are characterized by high performance and small size. Thanks to their compatibility with all common remote control systems and telemetries and the pre-programmed operating modes, they are universal and versatile. All YGE controllers have a 32-bit processor with high computing power.
The -T- in the designation of the YGE-95LVT stands for telemetry. The following protocols are currently supported:
Graupner HoTT V4
Jeti ExBUS
Multiplex Sensor BUS V2
Own YGE protocol for further telemetry connections via e.g. S32 (new Jlog from R² Prototyping).
Further protocols are in preparation and the 95LVT can be configured in many ways and new updates can be installed using the optional USB adapter. During operation, the PWM frequency is always automatically adapted to the needs of the motor and is therefore always optimal. Thanks to the new sine wave starting of the 95LVT, the starting behavior is now also SUPER SMOOTH. The heavy-duty (8/18A) and adjustable BEC (5.5 to 8.4V) complete the outstanding features of the YGE-95LVT.
Description:
The specified current is the maximum continuous full-gas current with good cooling.
2 to 6s LiPo, reverse regulation or switch-off in the event of undervoltage.
BEC - undervoltage detection can be switched off.
Current limitation
Speed control (governor mode).
Soft start.
Active freewheeling, therefore unlimited partial load resistance.
Automatic timing, or adjustable in 6 steps.
EMK brake adjustable.
F3A / Acro brake (brake strength continuously adjustable in flight).
Min. and max. values are logged and can be displayed in the optional PC tool after the flight (e.g. current)
Speed limit: 240,000 rpm (2-Poler)
Overtemperature / overload warning
Anti-flash: Reduces the switch-on spark.
Basic programming via mode setup.
Fine adjustment and selection of telemetry protocol via PC setup, suitable USB adapter is optionally available.
Technical data:
- 95A continuous / 160A peak
- 2 to 6S LiPo
- BEC: 8A continuous / 18A peak
- Integrated anti-flash
- Dimensions in mm: 78 x 32 x 15
- Weight without / with cable: 63g / 93g
- Cable Diameter battery/motor: 4²/4²
Product safety information
Manufacturer information:
Young Generation Electronics
Otto-Hahn-Str. 1A
Wallenhorst, Deutschland, 49134
www.yge.de
Register now for news and don't miss a thing
