ER8-GV ExpressLRS

SKU: HP0157.RX-ER8-GV
Manufacturers: Radiomaster

49,99 €

incl. 19% VAT , plus (Paket 2kg) Selection of tax zone / country of delivery

Available immediately
Delivery time: 2 - 4 Workdays (DE - int. shipments may differ)

Description

The RadioMaster ER series of PWM receivers are based on the revolutionary ExpressLRS system. It offers high performance, high reliability, flexible configuration, fast response speed and ultra-long range bringing you brand new experience with your hobby.

The ER8G & ER8GV receiver have been specially designed for glider pilots who require a compact and slim receiver. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use (only one voltage input can be used at any given time). Both ER8G & ER8GV feature a dual-antenna with telemetry power up to 100mw and can be used with a 1S Lipo receiver battery.

The ER8G Receiver has the same functionality as the ER8GV only without a built-in Vario for competitions that prohibit the use of Vario or simply for users who do not need a vario on their receiver.

Features

Based on the Revolutionary ExpressLRS System
High performance, high reliability, flexible configuration, fast response speed and ultra-long range
Support 8 PWM Channels
Optimized ground up PCB design
Automatically voltage telemetry of external battery voltage or built-in receiver voltage
ER8GV receiver is built-in high-precision air pressure sensor (Vario)
Supports Wi-Fi updates and WEBUI configuration
Reserve 4pin CRSF input port
High quality 2.54 mm connector
Standard 20 cm High Sensitivity Antenna
For fixed-wing aircraft and gliders
Compatible with all 2.4GHz ExpressLRS modules and transmitters with built in 2.4GHz ExpressLRS

EU-LBT VERSION

"Listen Before you Talk" is the abbreviation for a technical feature in radio transmission, which is mandatory for operation within the EU. Therefore, all our remote controls are shipped with this firmware.

This means:

4in1 modules are limited to the LBT-enabled protocols FrSKY X/X2 LBT, HoTT LBT, and DSMX
ELRS modules come pre-installed with EU-approved LBT firmware and are limited to a maximum output power of 100 MW

Specification (ER8G)

Item:	ER8G 2.4GHz ELRS PWM Receiver
Power supply:	DC 3.5 - 8.4V
Antenna type:	20cm high sensitivity antenna
Wireless protocol:	ExpressLRS 3.3.0 pre-installed
Output channel:	8CH PWM
Serial Output:	CRSF / Sbus
Telemetry power:	maximum 100mw (LUA can be set)
Battery voltage detection range:	DC 4.0 - 35V
Weight:	12 grams
Dimensions:	6013.513mm
Firmware:	Device Category: Radiomaster 2.4Ghz / Device: RadioMaster ER8-G 2.4GHz Diversity+8xPWM RX

Specification (ER8GV)

Item:	ER8GV 2.4GHz ELRS PWM Receiver
Power supply:	DC 3.5 - 8.4V
Antenna type:	20cm high sensitivity antenna
Wireless protocol:	ExpressLRS 3.2 pre-installed
Output channel:	8CH PWM
Serial Output:	CRSF / Sbus
Return power:	maximum 100mw (LUA can be set)
Built-in high-precision air pressure sensor (Vario)
Battery voltage detection range:	DC 4.0 - 35V
Weight:	12 grams
Dimensions:	6013.513mm
Firmware:	Device Category: Radiomaster 2.4Ghz / Device: RadioMaster ER8-GV 2.4GHz DiversitYy+8xPWM RX+Vario RX

Package Includes

1 * ER8G or E8GV 2.4GHz ELRS PWM Receiver
2 * Heat-shrink tube
1 * Voltage telemetry wire (Type-A)
1 * CRSF wire
1 * ELRS- RX- SBUS wire
1 * User Card