Vladimir's Model ProProp 11x7 is specially hand-laminated from carbon fiber, precisely balanced.
These propellers are extremely thin and have a high aspect ratio and thus achieve a very good power/current ratio. This increases efficiency of the powertrain. When used with VM Pro spinners, they fold closer to the fuselage and cause less drag than other propellers. For thicker fuselages it can be optimally mounted with our Hyper Spinner or Hyper Spinner Power.
Diameter: 11"
Pitch: 7"
Width of blade root: 8mm
Hinge pin hole Diameter: 3.0 mm
Weight: 7g
Power limit at ca. 800W
Note: It is also normal that the propellers and spinners do not always fit 100% immediately. It may be necessary to sand off the blade root a little so that it runs freely in the yoke. The cut-out in the spinner cap sometimes may also be slightly reworked so that the propellers can unfold completely. The blade root should not touch the spinner cap when the propellers are fully open.
Product safety information
Manufacturer information:
Vladimir's Model
Krasnooktiabrskaya 11/1
Kharkov, Ukraine, flat 20
Register now for news and don't miss a thing
