Vladimir's Model ProProp 17x10 Twist is specially hand-laminated from carbon fiber, precisely balanced.
These propellers are extremely thin and have a high aspect ratio and thus achieve a very good power/current ratio. This increases the drive efficiency of the powertrain. The Twist Spinner has a 10° inclined yoke and together with the 17x10 Twist Propeller, the propellers fold extremely flat to the fuselage even at this high pitch. Thus, it generates less resistance than other propellers.
Diameter: 17"
Pitch: 10"
Width of blade root: 8mm
Hinge pin hole Diameter: 3.0 mm
weight 9,8g
Power limit at ca. 900W
Note: It is also normal that the propellers and spinners do not always fit 100% immediately. It may be necessary to sand off the blade root a little so that it runs freely in the yoke. The cut-out in the spinner cap sometimes may also be slightly reworked so that the propellers can unfold completely. The blade root should not touch the spinner cap when the propellers are fully open.
Product safety information
Manufacturer information:
Vladimir's Model
Krasnooktiabrskaya 11/1
Kharkov, Ukraine, flat 20
| Durchmesser |
17" |
| Steigung |
10" |
| Blattwurzel |
8mm |
| Lochdurchmesser |
3mm |
| Gewicht |
9,8g |
| Leistungslimit |
ca. 900W |
Register now for news and don't miss a thing
