RadioMaster RP3-H ExpressLRS 2.4GHz Nano Receiver
Perfect for helicopters and any application that needs a rugged cased serial receiver
Plug'n'play solder free RP3-H ExpressLRS receivers compatible with NEXUS Helicopter flight controller
Optimized PCB design for better heat dissipation
LNA for better receiver range
PA for better telemetry range
Antenna Diversity for improved signal stability and range
Built-in a TCXO (temperature compensated crystal oscillator)
Automatically detects voltage telemetry of external battery voltage or receiver battery/ESC BEC voltage
Compatible with all 2.4GHz ExpressLRS modules and transmitters with built in 2.4GHz ExpressLRS
Specifications:
Item: RP3-H ExpressLRS 2.4GHz Nano Receiver
Type: ISM
MCU: ESP8285
RF Chip: SX1281
Telemetry RF power: Max 100mW
Antenna: 150mm 2.4GHz Antenna x2
Frequency Range: 2.404 - 2.479 GHz
Maximum receive refresh rate: 500Hz / F1000Hz
Minimum receiver refresh rate: 25Hz
Working voltage: DC 4.5 - 8.4V
Battery voltage detection range: DC 4.0 - 35V
Firmware Version: ExpressLRS v3.3.1 pre-installed
FW Target: RadioMaster RP3-H Diversity 2400 RX
Bus interface: CRSF/S.Bus
Dimensions: 28mm*24mm*8mm
Weight: 5,1g (including 2 antenna)
Scope of delivery:
- 1 x RP3-H ExpressLRS 2.4GHz Nano Receiver
- 2 x 150mm IPX1 2.4GHz T Antenna (installed)
- 1 x JST-GH CRSF 4 wire Pigtail
- 1 x JST-GH 4 wire to JST-GH CRSF cable
- 1 x JST-GH 4 wire to single Servo pin (single dupont connectors)
- 1 x Voltage telemetry wire
- 1 x Quick start guide
Product safety information
Manufacturer information:
Radiomaster
4/F, Yang Tian Building, Yang Tian Road, Xin'an Street, Bao'an District, Shenzhen
GuangDong, China, 518101
Responsible person:
Mahmoudi Modellsport
Kaiserstraße 6
Bayern
Schönbrunn, Deutschland, 85244
info@mahmoudishop.de
https://www.mahmoudishop.de
Register now for news and don't miss a thing
