Vladimir's Model ProProp 18x11 Twist is specially hand-laminated from carbon fiber. Extremely thin and highly stretched for optimal effectiveness. Designed exclusively for use with the VM Pro Twist spinners.
These propellers are extremely thin and have a high aspect ratio, achieving a very good power to current ratio. This increases the drive efficiency of the drivetrain.
The twist spinner has a 10° pitched center section and together with the 18x11 twist propeller, even at this high pitch, the propeller folds extremely flat against the fuselage. So it creates less drag than other propellers.
Diameter: 18"
Pitch: 11"
Blade root: 8mm
Hole diameter: 3mm
Weight: 10,3g
Power limit: about 900W
Note: It is also normal that the propeller and spider may not always fit 100% immediately. It may be necessary to grind down the blade root a bit to make it run freely in the center piece. The cutout in the spinner cap will also need to be slightly reworked to allow the propellers to fully unfold. The blade root should not touch the spinner cap when the propellers are fully open.
Product safety information
Manufacturer information:
Vladimir's Model
Krasnooktiabrskaya 11/1
Kharkov, Ukraine, flat 20
Register now for news and don't miss a thing
